If you are using AutoCAD 2013 or older, you could have problems with the objects. In order to join two objects, they have to be polylines (in the newer versions you can directly join polyline with line, arc, etc. To convert line or arc to polyline you just have to type in PE (PEDIT) and click on the object.
How do you join two lines in AutoCAD?
- Click Home tab Modify panel Edit Polyline. Find.
- Select a polyline, spline, line, or arc to edit. …
- Enter j (Join).
- Select one or more polylines, splines, lines, or arcs that are located end to end.
- Press Enter to end the command.
5 окт. 2016 г.
Can different polylines be joined together?
Lines, polylines, and arcs can be joined to the source polyline. All objects must be contiguous and coplanar.
How do you join two perpendicular lines in AutoCAD?
To Create Perpendicular Lines
- Click Home tab Draw panel Line drop-down Create Line Perpendicular From Point Find.
- Select the arc or line object to extend the line from.
- Specify the point on the object where the line will extend from.
- Specify a distance by either clicking in the drawing or entering a distance.
17 июл. 2019 г.
How do you join two lines in Inventor?
Easiest way I know how is to you the trim command (Short Cut Key: X) then hold shift to extend/join the lines together. Before you make a selection, look at the right mouse butten options, there is an option to select a loop, or just to select the line.
How do you convert multiple lines to polylines?
Converting Line to Polyline
Type PE on the command line and press Enter to start polyline edit command, the command line will prompt you to select objects for making changes. Click on the object which you want to change to polyline, you can also select multiple objects by selecting Multiple from the command prompt.
Why can’t I join two polylines in AutoCAD?
Why we can’t Join Polylines in the first place? One of the reasons why we can’t join our polylines is because they have different elevations. In this case, we just have to make their elevations equal. If you are using AutoCAD 2013 or older, you could have problems with the objects.
How do I convert lines to polylines in AutoCAD?
How to convert LINE to Polyline
- Type PEDIT and Press ENTER.
- Type M and Press Enter.
- Select objects and Press Enter.
- Press Enter.
- Type J and Press Enter.
- Press Enter.
- Press Esc (Escape)
13 мар. 2020 г.
How do I change the angle between two lines in AutoCAD?
Double-click the section line you want to change. On the Properties palette, click the Design tab, expand Basic Component Dimensions. Specify values for Angle 1 and Angle 2. These values define the angles of the two sides from the section line to create the section box.
What is fuzz distance in AutoCAD?
The fuzz factor is the distance AutoCAD should look from an unattached endpoint for another object. … AutoCAD can extend one or both lines to fill the gap, or simply add a segment to fill the gap; it may even need to do both.
What is the best knot to join two lines?
The surgeons knot is a very reliable knot for joining line and leader lines together. It’s most effective when joining two lines that are the same, or no more than three times line tests apart.
What is a leader line?
A leader line is a line that establishes a connection between a graphical representation of an item and some text. A leader points to a bit of our drawing and says: … A leader line also has a terminator and some text. A leader line may have a reference line under the text.