How do you draw an auxiliary view?
To sketch an auxiliary view, you begin with orthographic. views of the object and add projection lines perpendicular (90◦) to the slanted surface, adding a reference line any convenient distance from the view with the slanted surface.
How do you draw orthographic in AutoCAD?
To create an orthographic view and place it in a drawing
- Under Orthographic Drawings In the Project, click an existing drawing.
- Click Create New. In the New DWG dialog box, in the File Name box, enter a name. Enter an author name. Click OK.
11 июн. 2019 г.
How do I create an auxiliary view in Solidworks?
To create an auxiliary view:
- Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary. …
- Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View). …
- Move the pointer until the view is where you want, then click to place the view.
What are the six types of auxiliary view?
- Primary Auxiliary View.
- Secondary Auxiliary View.
- Symmetrical Auxiliary View.
- Unilateral Auxiliary View.
- Bi lateral Auxiliary View.
- Partial Auxiliary View.
21 окт. 2020 г.
What is the purpose of auxiliary view?
Auxiliary views are a type of orthographic projection used to determine the true size and shape of inclined and oblique surfaces of objects. Normally, auxiliary views are projected from existing principal views. However, auxiliary views can also be drawn first and then used to create a principal view.
What is isometric drawing in AutoCAD?
An AutoCAD isometric drawing is a 2 dimensional drawing just like a paper drawing. AutoCAD provides some tools to aid us in creating the drawing, but not very many. … The first thing we need to do is to put AutoCAD in the isometric mode. This mode is entered through the SNAP command.
What is meant by orthographic projection?
1 : projection of a single view of an object (such as a view of the front) onto a drawing surface in which the lines of projection are perpendicular to the drawing surface.
What is a first angle projection?
First angle projection is a method of creating a 2D drawing of a 3D object. It is mainly used in Europe and Asia and has not been officially used in Australia for many years. In Australia, third angle projection is the preferred method of orthographic projection. Note the symbol for first angle orthographic projection.
What is a aligned section view in Solidworks?
The aligned section view is similar to a Section View , but the section line for an aligned section comprises two or more lines connected at an angle. The aligned section rotates the cut into the plane of the selected segment.
How do I create a broken section in Solidworks?
To create a broken-out section:
- Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section. …
- Sketch a profile.
- Set options in the Section View dialog box. …
- Set options in the Broken-out Section PropertyManager. …
- Click .
How do I create a detail view in Solidworks?
Creating a Detail View
- Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail.
- The Detail View PropertyManager appears and the Circle tool. is active.
- Sketch a circle. …
- When the view is where you want it to be, click to place the view.
What is the difference between primary and secondary auxiliary views?
A primary auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection and is inclined to the other two. A secondary auxiliary view is projected from a primary auxiliary view onto a plane that is inclined to all three principal projection planes.
What is full auxiliary view?
There are two ways of viewing an auxiliary view: Page 3 1. The complete auxiliary view: This type of view allows you to see the entire side of that drawing as projected from that auxiliary plane. With this projection many of the other surfaces will appear foreshortened which can make the drawing difficult to read.
How many types of auxiliary planes are there?
Auxiliary planes are of _______ types. Explanation: These are A.V.P (Auxiliary vertical plane) and A.I.P. (Auxiliary inclined plane). Auxiliary vertical plane is perpendicular to the H.P. and inclined to the V.P. projection on an A.V.P. is called auxiliary front plane.