Contents

Create a Radius or Diameter Dimension

1. Click Annotate tab Dimensions panel Dimension. …
2. Select an arc or a circle.
3. At the prompt, enter r (Radius) or enter d (Diameter).
4. Before specifying the dimension line location, you can edit or rotate the text.
5. Click to place the dimension line.

29 мар. 2020 г.

## How do I make two lines in one line in AutoCAD?

Help

1. Click Home tab Modify panel Edit Polyline. Find.
2. Select a polyline, spline, line, or arc to edit. …
3. Enter j (Join).
4. Select one or more polylines, splines, lines, or arcs that are located end to end.
5. Press Enter to end the command.

5 окт. 2016 г.

## How do you make a 45 degree line in AutoCAD?

It’s very simple, follow these steps:

2. Type ‘L’ + ‘Enter’ (Line Command)
3. Click at one point & drag in a direction.
4. Enter length (e.g. 100 unit) &
5. Press ‘Tab’ button (or ‘@’)
6. Enter angle ’45 degree’
7. Press ‘Enter’ or ‘Space bar’
8. Done!!

## What is a radial dimension?

A radial dimension is a group design object. It allows for the dimensioning of a radius with respect to an arc or circle. The dimension can be placed either internally or externally in relation to the circumference of the arc/circle.

Create a Radius or Diameter Dimension

1. Click Annotate tab Dimensions panel Dimension. …
2. Select an arc or a circle.
3. At the prompt, enter r (Radius) or enter d (Diameter).
4. Before specifying the dimension line location, you can edit or rotate the text.
5. Click to place the dimension line.

## How do you join two lines in Inventor?

Easiest way I know how is to you the trim command (Short Cut Key: X) then hold shift to extend/join the lines together. Before you make a selection, look at the right mouse butten options, there is an option to select a loop, or just to select the line.

## How do you edit multiple lines in AutoCAD?

Edit a Multiline Style

1. At the Command prompt, enter MLSTYLE.
2. In the Multiline Styles dialog box, select the style name from the list. …
3. Click Element Properties.
4. In the Modify Multiline Styles dialog box, change the settings as needed.
5. Click OK.

29 мар. 2020 г.

## How do I Unjoin a line in AutoCAD?

AutoCAD – How to Break a Line at a Specified Distance and Gap

1. Type in Break at the command line, or select the Break tool.
2. Select the line you want to break.
3. Type in F (for first point), Enter.
4. Type in from and Enter, select the point you want to start the offset from, then type in the distance, for example @12,0, Enter.

9 авг. 2013 г.

## How do you draw a line with distance in AutoCAD?

To Create a Line Using a Direction and a Distance

1. Click Drafting tab > Draw panel > Line.
2. Specify the first point and then, move the cursor the same angle as the line that you want to create.
3. Enter a distance at the prompt.

4 февр. 2019 г.

## Is diameter only for circles?

In geometry, a diameter of a circle is any straight line segment that passes through the centre of the circle and whose endpoints lie on the circle. It can also be defined as the longest chord of the circle. Both definitions are also valid for the diameter of a sphere.

## Is a radius a linear dimension?

A linear diameter dimension is a group design object. It allows for the dimensioning of an arc or circle with respect to the diameter, rather than the radius. The dimension can be placed either internally or externally.

## Is diameter a dimension?

There are three dimensions most often used to describe a circle: The diameter – defined above. The radius – the distance from the circle’s center or origin to the edge, one half the diameter. The circumference – the length of the outside boundaries of the circle.