How do I use a revision cloud in AutoCAD?

You can create a new revision cloud by selecting two corner points or polygonal points, dragging your cursor, or you can convert an object such as a circle, polyline, spline, or an ellipse into a revision cloud. Use revision clouds to highlight parts of a drawing that are being reviewed.

What is a revision cloud in AutoCAD?

Revision clouds are polylines that consist of sequential arcs. They are used to call attention to portions of a drawing. A revision cloud is a polyline of sequential arcs to form a cloud-shaped object.

What is the purpose of a revision cloud?

A revision cloud is the standard way to showcase or call attention to an area of a drawing that has been modified or revised since its original issuance.

How do you reverse a revision cloud in AutoCAD?

To accept the revision cloud, right click. To reverse the direction, type Y or choose Yes in the prompt menu.

Drawing revision clouds

  1. Click the Revision Cloud tool button ( ) on the Draw toolbar.
  2. Choose Revision Cloud in the Draw menu.
  3. Type revision cloud in the command bar, then press Enter.
IT IS INTERESTING:  How can I install AutoCAD software in my PC?

8 сент. 2020 г.

How do you turn a polyline into a revision cloud?

Convert an Object to a Revision Cloud

  1. Click Home tab Draw panel Revision Cloud drop-down. Find.
  2. In the drawing area, right-click and choose Object.
  3. Select a circle, ellipse, polyline, or spline that you want to convert to a revision cloud.
  4. Press Enter to keep the current direction of the arcs. …
  5. Press Enter.

30 мар. 2020 г.

What controls the revision cloud arc length?

What controls the revision cloud arc length? The Arc Length value controls the arc length for all existing and new revision cloud annotations in the project. This value sets the minimum arc length for the 2-arc segment that is used to draw the revision cloud annotation.

How do I use a revision cloud in Revit?

Help

  1. In the project, open a view in which you want to indicate changes. …
  2. Click Annotate tab Detail panel (Revision Cloud). …
  3. On the Tools panel, click one of the draw tools.
  4. In the drawing area, place the cursor near the part of the view that has changed and draw the cloud to encompass the changed area.

18 февр. 2019 г.

How do I change the revision cloud size in Revit?

Modify a Revision Cloud

  1. Right-click the cloud, and click Override Graphics in View By Element.
  2. Change the values for the Weight, Color, and Pattern of the cloud lines.
  3. Click OK.

18 февр. 2019 г.

How do I change the scale of a revision cloud in Autocad?

To Change the Default Values for Arc Lengths in a Revision Cloud

  1. Click Home tab Draw panel Revision Cloud drop-down. Find.
  2. In the drawing area, right-click and choose Arc length.
  3. Specify a new minimum arc length.
  4. Specify a new maximum arc length. …
  5. Press Enter to continue with the command or Esc to end the command.
IT IS INTERESTING:  Is AutoCAD cloud based?

30 мар. 2020 г.

How do I change the direction of an arc in Autocad?

To create an arc, you can specify combinations of center, endpoint, start point, radius, angle, chord length, and direction values. Arcs are drawn in a counterclockwise direction by default. Hold down the Ctrl key as you drag to draw in a clockwise direction.

How do I show the command bar in Autocad?

To open the Command line, type CommandLine anywhere in your CAD interface. Then press Enter. The Command line will reappear. You can also open the Command line by holding down the CTRL + 9 keys.

What is a revision triangle?

If a revision is made to a drawing, that revision gets clouded and identified with a revision triangle. Once the drawings are submitted, the customer comes back with something else that needs revised.

How do you insert a revision triangle in Word?

Revision Triangle In Word

  1. Position the insertion point where you want the revision number to appear.
  2. Display the Insert tab of the ribbon.
  3. Click Quick Parts (in the Text group) and then click Field. …
  4. Choose Numbering from the Categories list. …
  5. In the Field Names list choose RevNum.

How do you insert a revision symbol in Autocad?

To Insert a Revision Cloud in the Drawing

  1. Select a revision cloud tool on a tool palette. A revision cloud tool with a tag symbol is located on the Annotation palette.
  2. Specify the first point of the cloud shape in the drawing area. …
  3. Specify the cloud shape, and click once when the cloud is closed. …
  4. Enter the text you want displayed in the tag, and click OK.
IT IS INTERESTING:  How do you convert mm to meters in AutoCAD?
Sketch up