Best answer: How do you make curves in AutoCAD?

How do you curve in AutoCAD?


  1. Click Home tab Draw panel Polyline. Find.
  2. Specify the start point of the polyline segment.
  3. Specify the endpoint of the polyline segment. Switch to Arc mode by entering a (Arc) at the Command prompt. …
  4. Specify additional polyline segments as needed.
  5. Press Enter to end, or enter c to close the polyline.

7 июл. 2014 г.

How do you draw a curve between two points in AutoCAD?


  1. Click Home tab Draw panel Curves drop-down Create Curves Between Two Lines Find.
  2. Select the first tangent.
  3. Select the second tangent. The following prompt is displayed: …
  4. Enter one of the following options to define the curve: Enter Length, or L, and then enter the length or pick the distance in the drawing.

2 янв. 2018 г.

How do you make a compound curve in AutoCAD?

To Create Reverse or Compound Curves

  1. Click Home tab Draw panel Curves drop-down Create Reverse Or Compound Curve Find.
  2. Select the arc object nearest the end to which the new compound or reverse curve is to be attached.
  3. Specify whether to create a Reverse or Compound curve.
  4. Do one of the following: Enter the radius at the prompt. …
  5. Do one of the following:
IT IS INTERESTING:  How do you make multiple points in AutoCAD?

17 июл. 2019 г.

Which object Cannot be converted into a region?

Valid objects include polylines, lines, circular arcs, circles, elliptical arcs, ellipses, and splines. Each closed loop is converted into a separate region. All crossing intersections and self-intersecting curves are rejected.

How do you draw a 3d curve in AutoCAD?

Click Home tab Draw panel Curves drop-down Create Curve From End Of Object Find.

Radius: Enter R and then do one of the following:

  1. Enter the radius at the prompt.
  2. Enter A and enter a degree of curve.
  3. Enter C and enter a degree of chord.

17 июл. 2019 г.

What is spline command in AutoCAD?

The spline command in AutoCAD is used to create a smooth curve, which passes through a set of predefined points. It creates a non-uniform curve passing through the points. Thus, spline can be created by defining fit points or Control Vertices (CV) points.

How do I join two circles in AutoCAD?

Simplest way to draw a line tangent to two circles is:

  1. click line.
  2. type ‘tan’ and press enter.
  3. click on Circle 1.
  4. type ‘tan’ again and press enter.
  5. click on Circle 2.

11 февр. 2013 г.

How do I cut a circle in AutoCAD?

Type extrim on the command line. At the Pick a POLYLINE, LINE, CIRCLE, ARC, ELLIPSE, IMAGE or TEXT for cutting edge: prompt, select one of the listed objects.

So remember:

  1. Start the TRIM command.
  2. At the Select cutting edges … Select objects or : prompt, press Enter.
  3. Select the object(s) to trim.

4 июн. 2011 г.

What are the elements of compound curve?

Elements of compound curve

  • PC = point of curvature.
  • PT = point of tangency.
  • PI = point of intersection.
  • PCC = point of compound curve.
  • T1 = length of tangent of the first curve.
  • T2 = length of tangent of the second curve.
  • V1 = vertex of the first curve.
  • V2 = vertex of the second curve.
IT IS INTERESTING:  Does AutoCAD require a good graphics card?

What is a compound curve?

: a curve made up of two or more circular arcs of successively shorter or longer radii, joined tangentially without reversal of curvature, and used on some railroad tracks and highways as an easement curve to provide a less abrupt transition from tangent to full curve or vice versa.

How do you draw a spiral curve in Autocad?

Click the “Alignment” tab and choose “Modify.” Click “Geometry Editor.” Locate the “Alignment Layout Tools” toolbar, and choose “Free Spiral-Curve-Spiral (Between Two Entities).” Click on the entity where you want the spiral curve to originate, and then click the entity where you want the curve to end.

Sketch up